It’s out! Check it out online!
Pages
Categories
-
Recent Posts
New Anti-Lockup Unit coming soon!
Wednesday, June 9, 2010
When in semi-auto, we have all encountered the dreaded “semi lockup” problem. This happens when the firing cycle and gears are JUST in the wrong place after a shot, and the trigger is disabled — locked out.
It is fixed by putting the gun into AUTO and pulling the trigger briefly. But if your gun is locked in semi-auto or full auto is disabled, you’re kind of shafted. 
Luckily the new Anti-Lockup Unit is an economical and effective means of fixing this! It works just like a forward assist – it “bumps” the motor and gears JUST ENOUGH to get past any lockup and instantly fix the problem. It does not otherwise interfere with the firing, and cannot be used to fire in fullauto.
It is compatible with stock-wired AEGs or MOSFET-enabled AEGs!
Coming soon! Stay tuned!
Trigger Master MOSFET Units ship starting May 31!
Thursday, May 27, 2010
Order now and your units will ship as soon as they are available, starting May 31!
Any orders placed will ship in 2-3 days, starting now! Thanks for your patience while we re-stocked on these units. 
New product announcements!
Thursday, April 29, 2010
Whoa! Check it all out! Not in stock at the moment, but ETA is mid to late May 2010!
Plug-and-Play MOSFET Add-ons:
Magazine Sensor Unit Kit
Sniper Lock-in Unit
and a new form factor for the Trigger Master Mark III:
Trigger Master Mark III “Flat” MOSFET
Trigger Master is OUT OF STOCK
Monday, April 26, 2010
Trigger Master computerized MOSFET units are out of stock in the online store.
More stock is expected by mid to late May 2010!
New product in the store!
Tuesday, April 20, 2010
There is a new category: Other Stuff!
We now carry some simple Paracord Bracelet kits! Every kit comes with everything you need, including detailed instructions with lots of pictures. Only 5$ each!
Trigger Master MOSFET price change, and new option!
Wednesday, March 31, 2010
Sadly, due to the continued price rise of parts, there is no choice but to increase the price of the Trigger Master computerized MOSFET. This increase was announced March 8 2010 and went into effect today, March 31. Prices of several key parts have actually been up for some time now — the MOSFET units just plain cost more to build (and have for a while now.)
BUT there are two additional options now to help offset this increase! Can you download a couple PDF files? Then why not save a couple bucks, and download and print your own manuals instead?
You can now order the Trigger Master MOSFET in a “print your own manuals” version. The product is exactly the same – but it just doesn’t have a printed product label and manual booklet included.
We don’t have to print anything (you download the manual and reference sheet instead) and you can save a couple bucks in return!
Click here for the Trigger Master MOSFET unit (full retail package with printed manual)
Click here for the Trigger Master MOSFET in a $$-saving “download and print your own manual” version!
Also a NEW wire and connector bundle is now available as well. It swaps the Dean’s style connector for some spade connector pairs instead – allowing you to make semi-permanent (and small) connections between wires if you need to (Dean’s style plugs are still available separately of course.) It is also cheaper – so order the print-your-own manuals version of the Trigger Master along with the new wire and connector kit and save!
Shipping delay (postal services unavailable) – resumes today
Tuesday, March 23, 2010
Since yesterday the electronic postal services we use for shipping orders from the online store have been unavailable, with no word on when it will be back up.
Well, we will shipping will resume today — even if we have to hand-letter and address every order!
Trigger Master Mark III price increase on Mar 31, 2010 :(
Monday, March 8, 2010
Sadly, due to the continued price rise of parts used in making the Trigger Master Mark III MOSFET unit, the price will soon be going up by $5 (from 80 to 85 USD.) This increase will be effective March 31, 2010.
Prices of several key parts have actually been up for some time now, so the MOSFET units just plain cost more to build and have for a while now. Unfortunately the time has finally come for that to be reflected in the selling price… but not until the end of the month, so order before then for the best price!
Trigger Master MOSFET units back in stock!
Tuesday, January 26, 2010
We’re good to go and shipping orders! Thanks for all your support!
Trigger Master MOSFET is out of stock
Monday, January 18, 2010
The Trigger Master computerized MOSFET unit is out of stock.
ETA for more to be ready is about 1 week (should have more by end of January 2010).
Simple MOSFET Unit (SMU) Released!
Saturday, January 16, 2010
We are proud to unveil the SMU!
It’s the perfect answer to anyone who wants the advantages of high-quality MOSFET driving for their guns but doesn’t need any of the extra features found in our high-end computerized Trigger Master MOSFET units!
New webstore working out well, so phasing it in
Wednesday, January 13, 2010
The new webstore has had several behind-the-scenes changes made to it, everything seems shipshape so the new store is being moved in more. Soon the old one-product-only store will be entirely replaced!
Also, some new products are on their way – I’ve been busy!
Contact forms not working – working on it!
Thursday, January 7, 2010
The contact forms stopped working after a server move, sorry about that! I am working on it now and will let you all know as soon as it’s up!
EDIT: It’s all back up and running. Sorry for any hassle!
New and improved wire in the store!
Tuesday, January 5, 2010
New and improved wire is here in the Trigger Master MOSFET store!
The old wire was good stuff, but this new stuff is even better in every way! And best of all, it’s for the same price when you buy a wire and connector bundle or the motor/battery wire separately. (The trigger wire is improved too, but it went up in price a very small amount from 1$ to 1.25$)
Motor/Battery wire is still 16 gauge to ensure it can handle any gun’s power. But now it is also:
- 0.23mm thinner (from 1.96mm to 1.73mm)
- Teflon jacketed on the outside (thin and tough)
- Silver-coated conductors inside
- MIL-W-16878/4 rated (600V, 200 degrees celsius)
In short the new wire holds its shape better, has a tougher (and thinner) coating, and is easier to insert into the Trigger Master MOSFET’s screw terminals! And it’s the same price!
The trigger wire is now MIL-W-16878E and about 50% thinner than before with no loss in performance!
Now that you know the scoop, check out the store!
Holiday Orders are shipping!
Tuesday, December 29, 2009
Hope you had (and are having) a good holiday break! Trigger Master MOSFET orders placed during the holidays are being shipped. It may take a few days to catch up completely but if you ordered over the holidays you will get a shipping notice soon. Thank you and Happy New Year!
We’re (partially) closing for the Holidays!
Tuesday, December 22, 2009
The online store (old store is here) will still accept orders. Any orders placed will ship after New Year’s at the latest.
Normal order processing will resume after New Year’s (January 1, 2010). Orders will still be processed in the meantime, just not as quickly as usual while we take a Christmas break!
Happy Holidays!
Trigger Master MOSFET units are back in stock!
Monday, November 16, 2009
Pre-orders now shipping!
Tuesday, November 10, 2009
As of yesterday, orders are being shipped in the order they were received!
The very first Trigger Master units are being sent out to people who placed their orders while we were out of stock. If you haven’t gotten a shipping notice yet, you should get one within the next few days. All pre-orders will be shipped by the end of the week! Only AFTER all pre-orders are shipped will the store be officially re-stocked.
Thank you for your support!
Trigger Master will be back in stock soon!
Tuesday, November 3, 2009
Good news! We will be back in stock MUCH sooner than expected! Order now, and your order will be shipped FIRST when our new stock arrives! (Pre-orders are shipped before the store is officially restocked)
New stock will be ready November 15th at the latest. All orders placed now will be shipped BEFORE then!
Trigger Master is out of stock
Tuesday, October 20, 2009
Out of stock until mid-December 2009! This is due to a major component being in short supply from the manufactuter. This date could change – if it does I will update straight away!
If you have already ordered and paid for a unit back when the ETA was early November, don’t worry because you WILL RECEIVE YOUR ORDER! But I won’t have any more after that until mid-December.
Version 3 mechbox anti-lockup tip
Monday, October 19, 2009
I just got finished with addressing an issue I think is worth sharing. As many of you probably know, “lock-up” is a risk with Version 3 gearboxes firing in semi-auto.
What is Lock-Up? Every now and then, if you are firing in semi-auto with a version 3 gearbox you might get what is called “lockup”. It’s when the cutoff lever inside the gearbox disconnects the trigger BUT the trigger doesn’t reset. So you can pull the trigger all you want but nothing happens. To fix it, you briefly switch your gun over to fullauto and pull the trigger. The gearbox turns over enough to “get past” the lockup and you’re ready to rock again.
Now for semi-only guns using a Version 3 gearbox this can be a problem. You don’t want to disable fullauto on your selector completely because you’ll have no way to clear a lockup. MOSFET units don’t solve the problem entirely because the problem is in how the gearbox works.
Well if you are using a MOSFET unit (like our Trigger Master MOSFET which has semi-only firing modes) there is a way you can be sure you can always clear a lockup! (Continued)
New web store has opened!
Tuesday, October 6, 2009
I am pleased to announce the opening of the new web store! It is now possible to order a multitude of separate parts and connectors in any combination you want!
If you run into any problems or have any questions at all, do not hesitate to contact me and I’ll sort it out. Thank you!
RealSword SVD info coming soon!
Thursday, September 24, 2009
I’m a bit late to the game, but with any luck I will soon be adding information on the RealSword Dragunov SVD to the Dragunov Rifles in Airsoft page. I’m very excited about this one!
Back from holidays, free gifts for orders placed while I was away!
Friday, September 18, 2009
I am back from a short vacation. Thanks to everyone who placed an order while I was gone!
As a thank you for your patience, every order that was placed while I was gone has also received a free gift! A Tiny Dinosaur kit (with two superfine-tipped jeweler’s tweezers) has been added to every order that was placed while I was gone!
Thank you again, and now that I’m back it’s back to business!
(And if you’re interested in that micro model kit, check it out here!)
